» Example 1 : fitting on the common rail (the most common)
1. Remove the engine cover and locate a connector on the rail.
2. Disconnect the connector.
3. Connect the tuning box in line.
4. Position the box in the engine compartment.
» Example 2 : fitting on 4 injectors
1. Remove the engine cover and locate the injectors.
2. Disconnect the 4 connectors and connect the box to each of them.
3. Connect the tuning box to the battery.
4. Position the box in the engine compartment.
» Example 3 : fitting to the VP Pump
1. Remove the engine cover and locate a sliding plug.
2. Remove this connector.
3. Plug in the P-Tronic tuning box in line.
4. Position the box and replace the engine cover.
» Example 4 : fitting on injection pump
1. Remove the engine cover and locate a rounded connector.
2. Remove this connector from the injection pump.
3. Connect the P-Tronic box
4. Connect the tuning box to the battery.
» Example 5 : Multiple connections (less than 5% of cases)
1. Locate two or three visible connectors.
2. Connect the first plug to one of the box.
3. Repeat this two or three times.
4. Position the box in the engine compartment.
PTRONIC
My account
Catalog
- Tuning box Cars, SUV
- Tuning box Vans
- Tuning box Motorhomes
- Tuning box Boats
- Tuning box Tractors
- Tuning box Forest engines
Delivery method
Certified
Customer service
Follow us
Payments
