• Search a tuning box :
  • Search
  • Performance chip Nissan NV 300 1.6 dCi 125 hp

    -15%

    See all comments

    15% lower fuel consumption

      kw hp Nm
    Original 92 125 320
    P-TRONIC 115 156 386
    Wins 23 (25%) 31 (25%) 66 (21%)

    Description

    P-Tronic tuning boxes for turbo diesel engines can provide up to 30% more power and 35% more torque. They also reduce diesel consumption with equivalent driving. These benefits come with no risk to mechanical components. P-Tronic never exceeds the standards prescribed by car manufacturers and retains all the original safety features.

    Your Nissan NV 300 wins 31 hp and 66 Nm

    With the P-Tronic PT-A-73862 tuning box, you can exploit the full potential of the diesel 1.6 dCi 125 hp engine in your Nissan NV 300. Its power increases to 156 hp (+ 25%) and its torque is boosted by 21%. All while cutting of the van consumption by 15%.

    Secure connections

    The PT-A-73862 box connects to the of the common rail using connectors supplied by the manufacturer. There is no risk for your Nissan ? the box acts as a custom external reprogrammer and guarantees optimum operating safety.
    Customer opinions Fitting diagram Shipping conditions Exchange and return
     

    The box has reconciled me to my Hyundai Tucson 1.6 T-GDI

    I chose the Tucscon 1.6 turbo petrol because I think it has the best specification in technical terms. After 200 km, I realised the small four-cylinder engine doesn't allow for much responsiveness. I had to keep the Sport function on all the time to get enough power, but even then only at high revs. I was having to fill up all the time. I found the solution with your tuning box, which has reconciled me to my car. Excellent acceleration and power at all engine speeds. Though the price initially put me off, I quickly forgot the investment, I'm so pleased with it. Fuel consumption is back below 9L. Graig J (Glasgow, Scotland)


     

    The Seat Leon 1.4 TSI 150 hp becomes a real sports car

    I am a VW customer, and this is my first Seat. I drive less than 15,000 km/year. I chose this little 1.4 petrol turbo with 150 hp. My first thought was that the engine is much nicer than my previous 1.6 TDI. I had tested the 1.4 in an Audi Q2 and I got the impression that they had changed the engine mapping in my Leon. It's much too linear for my taste.  I'm 62 and I wanted some fun when I bought this car. By adding a P-Tronic external reprogrammer (my fourth), my car has become much more agile and alert. The DSG gearbox is perfect. I miss the paddles. Conclusion: my TSI with the P-Tronic is the choice for a real sports car! Vinko K, Dubrovnik (Croatia)


     

    On Polo GTI 200 hp: the performance box compensates for the flaws of the DSG gearbox

    I I give my following the placement of your additional box-unit in my Polo 2.0 GTI 200 hp.  I would like to point out that I mainly bought it following the advice of your sales representative who confirmed to me that it would correct the flaws of the DSG gearbox. I must say that I am very happy. The box obviously does not change the DSG's gear ratio, but the extra HP and Nm allow faster revs and therefore more rhythmic gear changes. I would also like to point out that the engine has more fishing beyond 4500 rpm. That's really good.   Seb. I., Tours


    See other testimonials »

    » Example 1 : fitting on the common rail (the most common)

    1. Remove the engine cover and locate a connector on the rail.

    2. Disconnect the connector.

    3. Connect the tuning box in line.

    4. Position the box in the engine compartment.

     

    » Example 2 : fitting on 4 injectors

    1. Remove the engine cover and locate the injectors.

    2. Disconnect the 4 connectors and connect the box to each of them.

    3. Connect the tuning box to the battery.

    4. Position the box in the engine compartment.

     

    » Example 3 : fitting to the VP Pump

    1. Remove the engine cover and locate a sliding plug.

    2. Remove this connector.

    3. Plug in the P-Tronic tuning box in line.

    4. Position the box and replace the engine cover.

     

    » Example 4 : fitting on injection pump

    1. Remove the engine cover and locate a rounded connector.

    2. Remove this connector from the injection pump.

    3. Connect the P-Tronic box

    4. Connect the tuning box to the battery.

     

    » Example 5 : Multiple connections (less than 5% of cases)

    1. Locate two or three visible connectors.

    2. Connect the first plug to one of the box.

    3. Repeat this two or three times.

    4. Position the box in the engine compartment.

    Each order placed in this shop by credit card (Visa, Mastercard, American Express or Bancontact / Mister), Paypal or bank transfer entitles you to:

    - 15% discount on the official price automatically deducted,
    - Free shipping worldwide by express mail (TNT).

    If you are not completely satisfied or if the product fails within the first fourteen days after receipt, you can return it at your expense for a refund or replacement.




    640.90 €
    754.00 €

    In stock - Free shipping worldwide!

    Delivered in 48 h by TNT.

      
    Made in Belgium
    Quality guarantee
      
    15 days to change your mind
    Satisfied or refunded
      
    Free delivery
      
    Secure payments
    Debit on shipping
      
    Five years warranty
      
    E-commerce quality charter
    Aquestion, advice, order ?
    +44 20 3642 2769 Local call price 7 days a week - 7.30 am to 8.30 pm
    Contact by e-mail and ask your questions
      

    15% discount

      

    Free delivery

      

    Reprogrammable box

      

    Increased engine reliability

      

    Original "plug and drive" connectors

      

    Five years warranty



    » Price
    © P-Tronic - Avenue Andromède, 12 - 4802 Heusy - Belgium

    This website uses cookies which you can configure.