kw | hp | Nm | |
---|---|---|---|
Original | 130 | 177 | 400 |
P-TRONIC | 171 | 232 | 514 |
Wins | 41 (32%) | 55 (31%) | 114 (29%) |
Coming from the 30 TFSI 116 bhp (Audi A1), I wanted to move up a gear by offering myself an almost new 150 bhp A3 1.5 TFSI. What a disappointment! My mechanic explained to me that the difference in acceleration was mainly due to the fact that I had changed from a 3-cylinder to a 4-cylinder and that the A3 was heavier than the A1, but that obviously didn't solve the problem. While doing some research, I quickly came across your box-unit and bought it. I have been driving it for almost 6 months now and I must tell you that I am very happy with it! I have finally found a few good trade-ins worthy of the name. Thank you P-Tronic! Gustav O., Hamar
The tuning box compensates for the lack of engine power of my VW Polo 2.0 GTI 200 hp, especially at high rpm. I now have the real GTI feeling! I was a little worried that the box would disrupt the operation of the DSG gearbox, but it's fine. On the other hand, I don't see a significant decrease in consumption, but it's true that I drive hard… Thierry S. Le Touquet
I I give my following the placement of your additional box-unit in my Polo 2.0 GTI 200 hp. I would like to point out that I mainly bought it following the advice of your sales representative who confirmed to me that it would correct the flaws of the DSG gearbox. I must say that I am very happy. The box obviously does not change the DSG's gear ratio, but the extra HP and Nm allow faster revs and therefore more rhythmic gear changes. I would also like to point out that the engine has more fishing beyond 4500 rpm. That's really good. Seb. I., Tours
1. Remove the engine cover and locate a connector on the rail.
2. Disconnect the connector.
3. Connect the tuning box in line.
4. Position the box in the engine compartment.
1. Remove the engine cover and locate the injectors.
2. Disconnect the 4 connectors and connect the box to each of them.
3. Connect the tuning box to the battery.
4. Position the box in the engine compartment.
1. Remove the engine cover and locate a sliding plug.
2. Remove this connector.
3. Plug in the P-Tronic tuning box in line.
4. Position the box and replace the engine cover.
1. Remove the engine cover and locate a rounded connector.
2. Remove this connector from the injection pump.
3. Connect the P-Tronic box
4. Connect the tuning box to the battery.
1. Locate two or three visible connectors.
2. Connect the first plug to one of the box.
3. Repeat this two or three times.
4. Position the box in the engine compartment.
Each order placed in this shop by credit card (Visa, Mastercard, American Express or Bancontact / Mister), Paypal or bank transfer entitles you to:
- 15% discount on the official price automatically deducted,
- Free shipping worldwide by express mail (TNT).
If you are not completely satisfied or if the product fails within the first fourteen days after receipt, you can return it at your expense for a refund or replacement.
15% discount
Free delivery
Reprogrammable box
Increased engine reliability
Original "plug and drive" connectors
Five years warranty
This website uses cookies which you can configure.