Performance chip Iveco Daily 3.0 170 hp

-15%

See all comments

15% lower fuel consumption

	kw	hp	Nm
Original	125	170	400
P-TRONIC	152	206	477
Wins	27 (22%)	36 (21%)	77 (19%)

Description

P-Tronic tuning boxes for turbo diesel engines can provide up to 30% more power and 35% more torque. They also reduce diesel consumption with equivalent driving. These benefits come with no risk to mechanical components. P-Tronic never exceeds the standards prescribed by car manufacturers and retains all the original safety features.

Your Iveco Daily wins 36 hp and 77 Nm

With the P-Tronic PT-A-71042 tuning box, you can exploit the full potential of the diesel 3.0 170 hp engine in your Iveco Daily. Its power increases to 206 hp (+ 21%) and its torque is boosted by 19%. All while cutting of the vehicle consumption by 15%.

Secure connections

The PT-A-71042 box connects to the of the common rail using connectors supplied by the manufacturer. There is no risk for your Iveco ? the box acts as a custom external reprogrammer and guarantees optimum operating safety.

Customer opinions Fitting diagram Shipping conditions Exchange and return

Do not hesitate, get this box!

Hi! Just a short note. For anybody who owns a BMW X6 x-drive 35d (2010): do not hesitate, get this box, drive away with it and you\'ll be absolutely impressed!! The X-tra performance, the X-tra strength, the sound... WOW! Roland S., Mersin, Turkey

Fiat Bravo 1.4 T-Jet 120 hp: efficient acceleration

Hello, thanks first of all to P-Tronic, who deserve to be better known. Their external reprogramming brought my consumption down from over 10L/100 to 8. The engine responds perfectly at low and high revs. The operating range is very wide. I get a lot of pleasure from my Fiat Bravo petrol 1.4 T-Jet 120. Acceleration is very efficient and standing starts leave the show-offs in their Golf TDIs behind! Joakim (Drammen, Norway)

Opinion on the Renault Clio 0.9 TCE box-unit

As a retired sales representative, I decided to change my Renault Clio Diesel for a new petrol version, the 0.9 TCE.  Knowing that the power of this one is limited to 90 hp and 135 Nm of torque, my choice was not easy. Thanks to your P-Tronic system, I found an engine with a lot of torque, flexible and really pleasant to drive. Thank you to the whole P-Tronic team! PS: I recommended your site to my brother-in-law. Francis F., Chatenay Malabry (France)

See other testimonials »

» Example 1 : fitting on the common rail (the most common)

1. Remove the engine cover and locate a connector on the rail.

2. Disconnect the connector.

3. Connect the tuning box in line.

4. Position the box in the engine compartment.

» Example 2 : fitting on 4 injectors

1. Remove the engine cover and locate the injectors.

2. Disconnect the 4 connectors and connect the box to each of them.

3. Connect the tuning box to the battery.

4. Position the box in the engine compartment.

» Example 3 : fitting to the VP Pump

1. Remove the engine cover and locate a sliding plug.

2. Remove this connector.

3. Plug in the P-Tronic tuning box in line.

4. Position the box and replace the engine cover.

» Example 4 : fitting on injection pump

1. Remove the engine cover and locate a rounded connector.

2. Remove this connector from the injection pump.

3. Connect the P-Tronic box

4. Connect the tuning box to the battery.

» Example 5 : Multiple connections (less than 5% of cases)

1. Locate two or three visible connectors.

2. Connect the first plug to one of the box.

3. Repeat this two or three times.

4. Position the box in the engine compartment.

Each order placed in this shop by credit card (Visa, Mastercard, American Express or Bancontact / Mister), Paypal or bank transfer entitles you to:

- 15% discount on the official price automatically deducted,
- Free shipping worldwide by express mail (TNT).

If you are not completely satisfied or if the product fails within the first fourteen days after receipt, you can return it at your expense for a refund or replacement.

640.90 €

754.00 €