Performance chip Ford Transit 2.0 DI 100 hp

-15%

See all comments

15% lower fuel consumption

	kw	hp	Nm
Original	74	100	245
P-TRONIC	101	137	300
Wins	27 (36%)	37 (37%)	55 (22%)

Description

P-Tronic tuning boxes for turbo diesel engines can provide up to 30% more power and 35% more torque. They also reduce diesel consumption with equivalent driving. These benefits come with no risk to mechanical components. P-Tronic never exceeds the standards prescribed by car manufacturers and retains all the original safety features.

Your Ford Transit wins 37 hp and 55 Nm

With the P-Tronic PT-A-18551 tuning box, you can exploit the full potential of the diesel 2.0 DI 100 hp engine in your Ford Transit. Its power increases to 137 hp (+ 37%) and its torque is boosted by 22%. All while cutting of the vehicle consumption by 15%.

Secure connections

The PT-A-18551 box connects to the of the injection pump using connectors supplied by the manufacturer. There is no risk for your Ford ? the box acts as a custom external reprogrammer and guarantees optimum operating safety.

Customer opinions Fitting diagram Shipping conditions Exchange and return

I should have outfitted my Ranger sooner...

Hello, I hesitated for a long time to put a box in my Ranger. 200 hp is already a big thing but I was curious to see how far my 3.2 could go. Honestly, it's incredible. I'm discovering a new vehicle. It's as if it's lightened by the box, so much power and torque is enormous. I should have decided earlier ;-) Have a nice day! Pierre H., Metz

1.5 l/100 less fuel consumption on Ford Ranger 3.2

I bought your box-unit to reduce the fuel consumption of my Ranger 3.2 TDCI. I was expecting better but I went from 10.5 l to about 9 l anyway. As I make 30.000 per year, I will have amortized it in a little more than a year, which is not bad. Emile C., Arlon

Opinion on the Ranger Wildtrack 2.0 213 hp performance box

I received the box for my Ranger Wildtrack 2.0 biturbo 213 hp. Very simple connection of the different connectors thanks to your illustrated instructions and famous difference in performance compared to the original. I didn't expect to be able to gain so much torque. This is very useful in my very hilly region! Thank you! Orst M., Zirl

See other testimonials »

» Example 1 : fitting on the common rail (the most common)

1. Remove the engine cover and locate a connector on the rail.

2. Disconnect the connector.

3. Connect the tuning box in line.

4. Position the box in the engine compartment.

» Example 2 : fitting on 4 injectors

1. Remove the engine cover and locate the injectors.

2. Disconnect the 4 connectors and connect the box to each of them.

3. Connect the tuning box to the battery.

4. Position the box in the engine compartment.

» Example 3 : fitting to the VP Pump

1. Remove the engine cover and locate a sliding plug.

2. Remove this connector.

3. Plug in the P-Tronic tuning box in line.

4. Position the box and replace the engine cover.

» Example 4 : fitting on injection pump

1. Remove the engine cover and locate a rounded connector.

2. Remove this connector from the injection pump.

3. Connect the P-Tronic box

4. Connect the tuning box to the battery.

» Example 5 : Multiple connections (less than 5% of cases)

1. Locate two or three visible connectors.

2. Connect the first plug to one of the box.

3. Repeat this two or three times.

4. Position the box in the engine compartment.

Each order placed in this shop by credit card (Visa, Mastercard, American Express or Bancontact / Mister), Paypal or bank transfer entitles you to:

- 15% discount on the official price automatically deducted,
- Free shipping worldwide by express mail (TNT).

If you are not completely satisfied or if the product fails within the first fourteen days after receipt, you can return it at your expense for a refund or replacement.

760.75 €

895.00 €