Performance chip Citroen Jumper III 2.0 BlueHDi 163 hp

-15%

See all comments

15% lower fuel consumption

	kw	hp	Nm
Original	120	163	340
P-TRONIC	152	207	418
Wins	32 (27%)	44 (27%)	78 (23%)

Description

P-Tronic tuning boxes for turbo diesel engines can provide up to 30% more power and 35% more torque. They also reduce diesel consumption with equivalent driving. These benefits come with no risk to mechanical components. P-Tronic never exceeds the standards prescribed by car manufacturers and retains all the original safety features.

Your Citroen Jumper III wins 44 hp and 78 Nm

With the P-Tronic PT-A-53086 tuning box, you can exploit the full potential of the diesel 2.0 BlueHDi 163 hp engine in your Citroen Jumper III. Its power increases to 207 hp (+ 27%) and its torque is boosted by 23%. All while cutting of the vehicle consumption by 15%.

Secure connections

The PT-A-53086 box connects to the of the common rail using connectors supplied by the manufacturer. There is no risk for your Citroen ? the box acts as a custom external reprogrammer and guarantees optimum operating safety.

Customer opinions Fitting diagram Shipping conditions Exchange and return

Citroën C4: one litre less per 100 km

For me, the fuel savings were just hot air. But I consume almost 1 litre less per 100 km (Citroën C4 1.6 HDi 90 bhp).   Jules F., Wavre.

1.5 l/100 less fuel consumption on Ford Ranger 3.2

I bought your box-unit to reduce the fuel consumption of my Ranger 3.2 TDCI. I was expecting better but I went from 10.5 l to about 9 l anyway. As I make 30.000 per year, I will have amortized it in a little more than a year, which is not bad. Emile C., Arlon

I should have outfitted my Ranger sooner...

Hello, I hesitated for a long time to put a box in my Ranger. 200 hp is already a big thing but I was curious to see how far my 3.2 could go. Honestly, it's incredible. I'm discovering a new vehicle. It's as if it's lightened by the box, so much power and torque is enormous. I should have decided earlier ;-) Have a nice day! Pierre H., Metz

See other testimonials »

» Example 1 : fitting on the common rail (the most common)

1. Remove the engine cover and locate a connector on the rail.

2. Disconnect the connector.

3. Connect the tuning box in line.

4. Position the box in the engine compartment.

» Example 2 : fitting on 4 injectors

1. Remove the engine cover and locate the injectors.

2. Disconnect the 4 connectors and connect the box to each of them.

3. Connect the tuning box to the battery.

4. Position the box in the engine compartment.

» Example 3 : fitting to the VP Pump

1. Remove the engine cover and locate a sliding plug.

2. Remove this connector.

3. Plug in the P-Tronic tuning box in line.

4. Position the box and replace the engine cover.

» Example 4 : fitting on injection pump

1. Remove the engine cover and locate a rounded connector.

2. Remove this connector from the injection pump.

3. Connect the P-Tronic box

4. Connect the tuning box to the battery.

» Example 5 : Multiple connections (less than 5% of cases)

1. Locate two or three visible connectors.

2. Connect the first plug to one of the box.

3. Repeat this two or three times.

4. Position the box in the engine compartment.

Each order placed in this shop by credit card (Visa, Mastercard, American Express or Bancontact / Mister), Paypal or bank transfer entitles you to:

- 15% discount on the official price automatically deducted,
- Free shipping worldwide by express mail (TNT).

If you are not completely satisfied or if the product fails within the first fourteen days after receipt, you can return it at your expense for a refund or replacement.

640.90 €

754.00 €