Performance chip Abarth Grande Punto 1.4 163 hp

-15%

15% lower fuel consumption

	kw	hp	Nm
Original	120	163	250
P-TRONIC	146	198	305
Wins	26 (22%)	35 (21%)	55 (22%)

Description

Our petrol tuning box optimises the whole injection cycle of your engine to release its true power and improve turbo operation. It acts as a custom external reprogrammer.All safety parameters are maintained and the box is compatible with any gearbox.Consumption is reduced and the manufacturer's warranty is protected thanks to our "Plug & Drive" system.

Your Abarth Grande Punto wins 35 hp and 55 Nm

With the P-Tronic PT-A-26094 tuning box, you can exploit the full potential of the petrol 1.4 163 hp engine in your Abarth Grande Punto. Its power increases to 198 hp (+ 21%) and its torque is boosted by 22%. All while cutting of the compact car consumption by 15%.

Secure connections

The PT-A-26094 box connects to the of the injection system using connectors supplied by the manufacturer. There is no risk for your Abarth ? the box acts as a custom external reprogrammer and guarantees optimum operating safety.

Customer opinions Fitting diagram Shipping conditions Exchange and return

On Audi A3 35 TFSI: a real change!

A very significant difference since the installation of the box on my Audi A3 35 TFSI. Thank you for your seriousness and see you in 4 years for my next vehicle! Demir G, Zadar

I put it in my Bora 3 months ago

Super box-unit! I put it in my VW Bora 1.9 TDI 3 months ago. At the beginning, I really pushed it. But then I calmed down. Now I use about 1 litre less fuel.   Stijn P., Hasselt.

I should have outfitted my Ranger sooner...

Hello, I hesitated for a long time to put a box in my Ranger. 200 hp is already a big thing but I was curious to see how far my 3.2 could go. Honestly, it's incredible. I'm discovering a new vehicle. It's as if it's lightened by the box, so much power and torque is enormous. I should have decided earlier ;-) Have a nice day! Pierre H., Metz

See other testimonials »

» Example 1 : fitting on the common rail (the most common)

1. Remove the engine cover and locate a connector on the rail.

2. Disconnect the connector.

3. Connect the tuning box in line.

4. Position the box in the engine compartment.

» Example 2 : fitting on 4 injectors

1. Remove the engine cover and locate the injectors.

2. Disconnect the 4 connectors and connect the box to each of them.

3. Connect the tuning box to the battery.

4. Position the box in the engine compartment.

» Example 3 : fitting to the VP Pump

1. Remove the engine cover and locate a sliding plug.

2. Remove this connector.

3. Plug in the P-Tronic tuning box in line.

4. Position the box and replace the engine cover.

» Example 4 : fitting on injection pump

1. Remove the engine cover and locate a rounded connector.

2. Remove this connector from the injection pump.

3. Connect the P-Tronic box

4. Connect the tuning box to the battery.

» Example 5 : Multiple connections (less than 5% of cases)

1. Locate two or three visible connectors.

2. Connect the first plug to one of the box.

3. Repeat this two or three times.

4. Position the box in the engine compartment.

Each order placed in this shop by credit card (Visa, Mastercard, American Express or Bancontact / Mister), Paypal or bank transfer entitles you to:

- 15% discount on the official price automatically deducted,
- Free shipping worldwide by express mail (TNT).

If you are not completely satisfied or if the product fails within the first fourteen days after receipt, you can return it at your expense for a refund or replacement.

845.75 €

995.00 €